Community

Use this tool to simply build MPLS traffic engineering tunnels for your IOS devices. Note that you can only create dynamic path tunnels with this tool.

This tool requires 2008.04+ to run correctly.

Use this tool to configure STP on your IOS interfaces. You can configure it on one interface or many at the same time. You can add BPDU Guard, Cost, STP Guard, and enable Portfast using this tool.

You must have 2008.04+ for this tool to run correctly.

Easily configure trunks on your IOS switchports. Allows you to set the encapsulation, with options for allowed/native/pruning of vlans.

Note that you need 2008.04+ for this tool to run correctly.

Use this tool to simply create or modify your VTP settings. You can input the domain name, the mode, and whether you want to use a password.

Note that you need 2008.04+ to properly run this tool.

A tool that accepts a 'source' and 'destination' address and provides the following:

* status graphic (OK = 100%, WARN = 50% {routing issue?}, ERROR = 0%)
* source address
* destination address
* progress bits (!!!!!, !U!U!U!, ...., etc.)
* success rate (percentage)
* round trip (min/avg/max)

Use this tool to easily modify or create your Radius settings for IOS devices. Useful if you are changing your radius key across your network.

Use this tool to easily modify or create your Tacacs+ settings for IOS devices. Useful if you are changing your tacacs key across your network.

Use this tool to easily create vlans on our vtp transparent/server devices. Only has the option for vlan number and the name.